The InSkew 600 is used as a structural batten fixing, normally being fixed through the counter-batten, the insulation sarking and then a minimum of 35mm into the rafters.

The density of fixing (the number of fixings per M2) must be enough to resist both the wind suction & the sliding load.

Occasionally the InSkew 600 is fixed through the tile-batten; in this case please phone the Helifix sales office for advice.

Telephone Number 020 8735 5222

Please answer the questions (below) then click the "submit" button to email us your enquiries, or print out this page and fax us the sheet on 020 8735 5223.

Contact Name
Branch
Telephone
Fascimile
Email

Counter-Batten Thickness:
The counter-batten must be a minimum of 25mm thick; if this is not possible contact the Helifix Sales Office.

Insulation Thickness:
The thickness of the insulation above the rafters that is to be fixed through - some insolation is rebated or between the rafters.
Additional material thickness:
Sometimes, other materials such as ply or plasterboard are placed between the insulation and the rafters.
Counter-Batten Centres:
This is the counter-batten spacing and is usually the same as the rafter centres.
Roof Pitch:
This is needed in order to calculate the sliding load. You can round this figure up or down to the nearest 10°.
What sort of tiles/slates are to be used?
This is needed in order to calculate the sliding load. At best we need to know the laid weight in kg/m², at worst the name of the slate/tile to be used.
Lead/Steel Sheets
Artificial Slates (most Eternits)
Natural/Welsh Slates
Interlocking Concrete Tiles
Clay Tiles
Cotswold Stone
Other
(please specify)
Wind Exposure:
What County is the site in?
Would you consider it's exposure to the wind:
Take into account if the site is in town, on top of a hill, near the coast etc.
minimum medium maximum
Is the building height over 15 metres?
yes
no
What is the area of the roof?
This is needed to calculate the total number of fixings required. Please specify in m².
- Thank You For Your Time -


Click here to return to InSkew!