ResiTie
Remedial wall tie with a resin/resin fix
ResiTie installation
1. Drill clearance hole (10mm for 6mm fixing) through near leaf and 55mm into far leaf
2. Clean both holes with air-jet or brush
3. Inject PolyPlus resin into far leaf
4. Insert tie, with sleeves, until sleeve enters far leaf
5. After curing, test security of fixing in far leaf
6. Fill hole in near leaf with resin, cure and make good
System Components
- ResiTies with plastic sleeves
- Hand-held support tool
- Load test unit and collet key
- Drill bit for clearance hole
- PolyPlus resin cartridge and extension nozzles
Applications
- Replacement tie for cavity walls where a resin bond is required at both ends of the tie
- Recommended for small jobs requiring 200 ties or less
Features
- One-piece grade 304 or 316 stainless steel tie
- Quick and easy installation
- Effective in all common building materials
- Four lengths cover cavities up to 140mm
- Accommodates normal building movement
Benefits
- Highly economical and effective
- Minimal inconvenience to occupants
- Leaves building virtually unmarked
- No splitting of bricks or blocks
- Multiple drip points prevent transfer of water across cavity
- Far leaf security of fixing easily tested
Bonding Agent
- PolyPlus resin in both leaves
Visit our downloads section for further detailed information