- For both new build and remedial upgrade to meet current seismic requirements and restore structural performance.
|
The DryFix system is used in conjunction with a special patented connector fitted to the tie end and connected laterally with HeliBar 45 stainless steel wire.
In new build constructions these are installed as the outer leaf is constructed while in remedial situations the DryFix ties are installed, in the standard manner, through the ‘T’ joint of the outer leaf mortar, the seismic connectors fitted and then threaded together with wire in the channelled out mortar joint and grouted in place.
Most methods are designed for new construction only and are very disruptive in remedial situations, often requiring masonry to be dismantled and rebuilt.
This is not the case with the Helifix system which is the only positive lock seismic connector with easy overlap for long runs.
|
- Simple and straightforward to install.
- Easily tested for security of fixing in back-up material.
- Non-disruptive - requires no taking down and rebuilding.
- Strong, stress-free connection with back-up material.
- Additional strength created in outer leaf.
- Positive lock with easy overlap for long runs.
- Fully concealed and visually sympathetic.
|
|
